FREE SG Delivery above SGD 100  |  All Prices inclusive of GST

FREE SG Delivery above SGD 100  |  All Prices inclusive of GST

Tascam SD-20M
EC-TASCAM-SD20
SGD 413.00

Availability: In stock

Solid State Recorder

Price includes 7% GST

OR

Description

TASCAM’s SD-20M is a simple-to-use solid-state recorder for demanding installations. The 1U rackmount includes a pair of microphone preamps with phantom power for direct microphone recording. Both the mic inputs and line inputs can be recorded simultaneously in four-channel mode. The dual recording mode captures a copy of your audio at a lower level, as insurance against distorted takes. 


 


The SD-20M includes a battery backup system – AA batteries can keep recording for hours in case of power loss. A wired remote or footswitch can be attached to control recording and playback. Variable speed playback allows the playback to be changed without affecting the pitch. 


 


Designed for installations like schools, house of worship, and conferences, the TASCAM SD-20M is a flexible, affordable solution for long-form recording.


 


 


Features




  • Four-track solid-state recorder




  • Stereo or four-track recording (two mic/line inputs + two line inputs)




  • Two microphone inputs on XLR-1/4" combo jacks, compatible with +4 dBu line level and switchable phantom power (+48V)




  • Two RCA line inputs on rear side for tracks 3-4 (compatible with -10 dBV line level)




  • Two recording formats supported: 




    • WAV/BWF: 44.1-96 kHz, 16/24-bit

    • MP3: 32-320 kBps



  • Simple user interface




  • Low-cut filter with three levels (40/80/120 Hz)




  • Dual recording function records a copy of your audio at a lower level for a distortion-proof safety track




  • File divide feature




  • Variable speed playback changes speed without changing the pitch (0.5 times to 1.5 times in 0.1 increments)




  • Auto-recording function to automatically start recording based on input level




  • RCA stereo line outputs




  • Standard stereo headphones output




  • AA battery backup - keeps recording even after power loss




  • SDXC media slot supports cards up to 128GB



Specifications

Recording Media SD card (64 MB to 2 GB)
SDHC card (4 GB to 32 GB)
SDXC card (48 GB to 128 GB)
Audio Recording/Playback Format BWF: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24-bit
WAV: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24-bit
MP3: 44.1/48 kHz, 32/64/96/128/192/256/320 kBps
Number of Channels 4 channels (stereo x 2)
Mic/Line Inputs 2 x Combo Jacks: XLR-3-31 (1: ground, 2: hot, 3: cold)
1/4" (6.3 mm) TRS jack (Tip: hot, ring: cold, sleeve: ground)
Mic Input Impedance Front jacks set to Mic
2.7 kOhms (phantom power supported)
Maximum Input Level: 0 dBu (gain: low)
Minimum Input Level: −67 dBu (gain: high)
Line Input Impedance Front jacks set to Line
10 kOhms or higher
Nominal Input Level +4 dBu
Maximum Input Level: +20 dBu
Minimum Input Level: -12 dBu
Line Input Impedance Line inputs 3/L and 4/R (unbalanced, RCA jacks)
10 kOhms or higher
Nominal Input Level -10 dBV
Maximum Input Level: +6 dBV
Minimum Input Level: -26 dBV
Audio Output Jacks Nominal Output Level -10 dBV
Maximum Output Level: +6 dBV
Output Impedance: 200 ohms
Headphone Output 1/4" (6.3 mm) standard stereo jack
Maximum Output Power: 20 mW + 20 mW (32 ohms load, 0.1 % distortion)
Remote Control Connector 1/16" (2.5 mm) TRS micro jack
Frequency Response 20 Hz to 20 kHz +1/-3 dB (input 1-2 to output, Fs 44.1/48 kHz)
20 Hz to 40 kHz +1/−3 dB (input 1-2 to output, Fs 96 kHz)
Distortion 0.01 % or less (Input 1-2 to output, Fs 44.1/48/96 kHz)
Signal to Noise Ratio 100 dB or more (input 1-2 to output, Fs 44.1/48/96 kHz)
Power Supply Dedicated AC adapter (TASCAM PS-P1220E), 4 AA batteries (alkaline, NiMH, or lithium)
Power Consumption 5 W (maximum)
Input Current 1 A (maximum)
Operating Temperature Range 41 to 95°F (5 to 35°C)
Dimensions (W x H x D) 19 x 1.8 x 12" (483 x 45 x 300 mm)
Weight

2.8 kgs (including batteries)


2.7 kgs (excluding batteries)

  Loading...