FREE SG Delivery above SGD 100 | All Prices inclusive of GST
Recently added item(s) ×
You have no items in your shopping cart.
FREE SG Delivery above SGD 100 | All Prices inclusive of GST
The nX Series 4-Channel Multi-Mode Power Amplifier from Ashly is capable of driving 2, 4, and 8 ohms loads at full power and offers a maximum rated output power of 150W per channel at 25V, 70V, and 100V modes. It features a universal switch-mode power supply with PFC (Power Factor Correction) that operates from 70 to 270 VAC. The multi-mode output capability allows each individual amplifier output channel to be set for low-impedance (2, 4, and 8 Ohms) or constant voltage (25, 70, or 100V) operation using DIP switches.
The amplifier has power-saving Ashly EMS (Energy Management System) that provides an automatic sleep-mode drawing less than 1W. It is suitable for live sound and fixed installation sound systems in stadiums, arenas, performance venues, places of worship, and convention centers.
Number of Channels | 4 |
Voltage Gain | Selectable at 26, 32, or 38 dB, or 1.4 V |
Damping Factor | >250 (8 Ohms load <1 kHz) |
Filter | Input High Pass Filter: 80 Hz second-order |
Distortion | SMPTE (Typical): <0.5% THD-N (Typical): <0.5% (8 Ohms, 10 dB below rated power, 20 Hz to 20 kHz) |
Channel Separation | -75 dB (dB from full output, 1 kHz) |
Signal-to-noise | >99 dB (un-weighted 20 Hz to 20 kHz, Gain @ 26 dB) |
Frequency Response | 20 Hz to 20 kHz, ±0.05 dB |
Input Impedance | 10 kOhms |
Balanced Input | Euroblock 3.5 mm |
Maximum Input Level | +21 dBu |
Speaker Output | Euroblock 7.62 mm |
Level Control | Remote DC Level Control: Euroblock 3.5 mm - Gnd, CV, V+ per input |
Attenuation | Per Channel: Rear panel, fully off= mute |
Front Panel LED Indicators |
White LED:
Protect: On (fault condition or shut down), Off
|
Protection Circuits | Inrush current limitation, temperature monitoring, output over-power protection, and mains fuses |
Cooling | Continuously variable temperature controlled fan |
Nominal Voltage | Input: 120 to 240 VAC @ 50/60 Hz |
Operating Range | 70 to 270 VAC @ 50/60 Hz |
Power-Up Action | Minimum Power-Up: 70 VAC @ 50/60 Hz |
Power Supply Type | SMPS with active PFC (Power Factor Correction) |
AC Mains Power Cord | Connector: Detachable NEMA 5-15 for USA |
Maximum Output Power | Low Impedance Output Mode (All Channels Driven at Rated Load): 2, 4, & 8 Ohms: 150 W |
Low Impedance | Low Impedance Output in Bridge Mode (All Channels Driven at Rated Load): 4, & 8 Ohms: 300 W |
Voltage Output | Constant Voltage Output (All Channels Driven at Rated Load): 25, 70, & 100 V (Per Channel): 150 W |
Power Draw |
Total AC Mains Power Draw (Typical Input):
|
Current Draw |
For 120 VAC (Typical Input, Total for all Channels):
|
Thermal Dissipation |
Typical Input (Total for all Channels):
|
Environmental Conditions | 32 to 120°F (0 to 49°C), non-condensing |
Dimensions (W x H x D) | 19.00 x 1.75 x 14.54" (483 x 45 x 369 mm) |
Weight | 12.1 lb (5.5 kg) |
Receive exclusive online deals & discounts.