FREE SG Delivery above SGD 100 | All Prices inclusive of GST
Recently added item(s) ×
You have no items in your shopping cart.
FREE SG Delivery above SGD 100 | All Prices inclusive of GST
Constant Beamwidth Technology™ Two-Way Line Array Column with Asymmetrical Vertical Coverage. With improved mounting bracket for enhanced aiming flexibility and stronger grille.
The CBT 70J-1, with Constant Beamwidth Technology™, represents a breakthrough in pattern control consistency, utilizing complex analog delay beam-forming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor column speakers. (shown with included grille removed)
Components |
Four 130 mm (5 in) LF drivers |
Frequency Range (-10dB) | 60Hz - 20kHz |
Coverage |
Vertical (selectable via switch) |
Sensitivity (2.83V@1m) |
Narrow: (speech mode) 98 dB (1 kHz - 8 kHz) |
Nominal Impedance |
8 ohms |
Power Capacity |
500 W (2000 W peak), 2 hrs |
Max SPL |
Narrow: (speech mode) 125 dB cont ave (131 peak) |
Low Frequency Drivers |
4 pcs, 130 mm (5 in) drivers, dual magnet neodymium, 38 mm (1.5 in) voice coil, damped blended textile surround, coated diaphragm for moisture, UV, and salt resistance, shielded. |
High Frequency Drivers |
16 pcs, 25 mm (1 in) drivers, dual magnet neodymium, encased magnet and coated diaphragm for moisture, UV and salt resistance, shielded. |
Enclosure |
Fiberglass reinforced ABS cabinet, painted aluminum grille |
Outdoor Capability |
IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant. |
Insert Points |
10 M6 swivel (pan)/tilt (16 mm deep) insert points on back panel. |
Mounting |
Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously variable +/-15 degree tilt, as well as 5 degree fixed increment points. Ten threaded mounting points located on back panel of cabinet conform to industry standard rectangular 127 x 70 mm (5.0 x 2.75 in) pattern for OmniMount® 60.0 and other compatible third-party brackets. Threaded mounting points can be utilized |
Dimensions (H x W x D) |
694 x 170 x 237 mm |
Net Weight | 9.5kg |
Included Accessories |
Swivel (pan) / tilt wall bracket |
Optional Accessories |
MTC-PC2 terminal panel cover |
Receive exclusive online deals & discounts.