FREE SG Delivery above SGD 100  |  All Prices inclusive of GST

FREE SG Delivery above SGD 100  |  All Prices inclusive of GST

JBL CBT 100LA-LS (White)

Regular Price: SGD 1,587.00

Special Price SGD 1,417.00

You Save: 11%

Availability: In stock

Line Array Column Loudspeaker with EN54:24 Certification

Price includes 7% GST



Line Array Column Loudspeaker with with Sixteen 50 mm (2 in) Drivers and EN54:24 Certification


The CBT 100LA-LS, with Constant Beamwidth Technology™, represents a breakthrough in pattern control consistency, utilizing complex analog delay beam-forming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor column speakers.




  • Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.

  • EN54-24 Compliant (when installed with included MTC-PC2 panel cover).

  • Vertical pattern coverage switchable between 40° for medium-throw coverage and 15° for long-throw applications.

  • Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.

  • Dynamic SonicGuard™ overload protection

  • Swivel (pan)/tilt wall bracket included.

  • Built-in 70V/100V transformer, plus 8 ohm direct capability.






Sixteen 50 mm (2 in) Full-Range

Frequency Range (-10dB) 120 Hz – 20 kHz
Vertical Coverage

Narrow Mode: 15° (2 kHz - 16 kHz) (±10°)
Broad Mode: 40° (1 kHz - 16 kHz) (±10°)
Horizontal: 150° (ave, 1 kHz – 4 kHz, ±20°)


Sensitivity (2.83V@1m)

Narrow: (speech mode) 96 dB (2 kHz - 14 kHz)
(music mode) 93 dB (300 Hz - 18 kHz)

Broad: (speech mode) 93 dB (2 kHz - 14 kHz)
(music mode) 90 dB (300 Hz - 18 kHz)

EN54 Sensitivity (@ 4m) 76 dB (per EN54:24 spectrum and measurement conditions at 4 meters, set at broad/music mode.)
Nominal Impedance

8 ohms (in Thru mode)

15w@70v; 30w@100v Tap = 333Ω
30w@70v; 60w@100v Tap = 167Ω 
60w@70v; 120w@100v Tap = 83Ω 
120w@70v; N/C@100v Tap = 42Ω

Power Capacity (8ohm setting)

325 W (1300W peak), 2 hrs
200 W (800W peak), 100 hrs


Narrow: (speech mode) 121 dB cont ave (127 peak)

(music mode) 118 dB cont ave (124 peak)

Broad: (speech mode) 118 dB cont ave (124 peak)

(music mode) 115 dB cont ave (121 peak)

EN54 Max SPL (@ 4m)

92 dB (per EN54:24 spectrum and measurement conditions, at 4 meters)

70V/100V Transformer Taps

120W, 60W, 30W (15W at 70V only), and 8Ω thru, via switch

Reference Axis

Specification and measurement referenced on-axis vertically and horizontally to the center point of the speaker baffle.


Fiberglass reinforced ABS cabinet with UL94-5VB flammability rating, painted aluminum grille

Outdoor Capability

IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.

Insert Points

18 M6 insert points on back panel.


Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points. Eighteen threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.

Dimensions (H x W x D)

1000 x 98.5 x 153

(39.4 in x 3.8 in x 6.0 in)

Net Weight 7.2kg
Included Accessories

Swivel (pan) / tilt wall bracket

MTC-PC2 terminal panel cover

Optional Accessories

MTC-CBT-FM1 flush-mount low-profile wall-mount bracket

MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand


Click Here for Specs Sheet