FREE SG Delivery above SGD 100  |  All Prices inclusive of GST

FREE SG Delivery above SGD 100  |  All Prices inclusive of GST

Shure FP15/83-P4
FP15/83-P4

Regular Price: SGD 748.00

Special Price SGD 619.34

Availability: In stock

FP1, Transmitter, FP5 Receiver & WL-183 Mic

Price includes 7% GST

OR

Description

Package Inlcudes



  • FP1 Wireless Bodypack Transmitter

  • FP5 Wireless Receiver

  • Shure WL183 Lavalier Microphone

  • Frequency: P4 (702.000–726.000) MHz


 


FP1 Wireless Bodypack Transmitters feature a lightweight and durable design, for use with FP Portable Wireless Receiver and SLX Wireless Receiver.



FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.


The FP5 receiver is a lightweight, durable, battery-powered portable receiver that is designed for on-camera mounting. Featuring Automatic Frequency Selection and Automatic Transmitter Setup, diversity antennas, and output via TA3F cable to either XLR or 1/8” connectors. For use with FP Wireless Transmitters and SLX Wireless Transmitters.


WL183 (Omnidirectional): Recommended for general purpose sound reinforcement, recording, or remote monitoring applications. Low handling noise. Pickup angle: 360 degrees.


 






FP1 Features





  • Automatic Transmitter Setup instantly syncs the transmitter to the receiver frequency

  • LED indicator for control lockout, IR RF sync, low battery indicator

  • Audio Input Gain for adjustment of audio level

  • 4-Pin Microphone Input Jack for use with lavaliers or headset microphones with TA4F connectors.

  • Powered by 2AA batteries

  • Legendary SM58® or VP68 microphone capsule options





FP5 Features





  • Shure patented Audio Reference Companding for crystal-clear audio

  • Automatic Frequency Selection locates an open frequency at the touch of a button

  • Automatic Transmitter Setup instantly syncs the transmitter to the receiver frequency

  • Power LED with low battery indicator

  • RF LED indicates transmitter sync when illuminated

  • 24 MHz bandwidth

  • Up to 20 compatible systems simultaneously (region dependent)

  • Powered by 2AA batteries – no power cord required

  • Receiver output level control manages output to camera/mixer

  • TA3F cable output to either XLR or 1/8” connectors (included)

  • Diversity antennas for consistent reception of signal transmission

  • Rugged and lightweight Shure construction

  • Camera Shoe Mount (included)




 



WL-183 Features





Specifications

FP1 Transmitter

Gain Adjustment Range                                                                                    −10 to +20 dBV
Input Impedance 1 MΩ
RF Output Power 10 to 30 mW
varies by region
Pin Assignments TA4M ground (cable shield)
+ 5 V Bias
audio
Tied through active load to ground (On instrument adapter cable, pin 4 floats)
Dimensions 108 mm x 64 mm x 19 mm (H x W x D)
Weight 81 g (3 oz.), without batteries
Housing Molded polycarbonate case
Power Requirements 2 AA batteries, 1.5 V
Battery Life up to 12 hours (alkaline)

 

 FP5 Receiver

Audio Output Type TA3F
Configuration Impedance balanced
Pin Assignments 1=ground, 2=hot, 3=cold

Maximum Audio Output Level.
Ref ±38 kHz deviation with 1 kHz tone

–5 dBV (into 600 Ω load)
Impedance 200 Ω
Dimensions 108 mm X 64 mm X 19 mm (H x W x D)
Weight 81 g (3 oz.)
Housing Molded polycarbonate case
Sensitivity –108 dBm for 12 dB SINAD, typical
Power Requirements LR6 AA batteries, 1.5 V
Battery Life up to 12 hours (alkaline)
  Loading...