FREE SG Delivery above SGD 100  |  All Prices inclusive of GST

FREE SG Delivery above SGD 100  |  All Prices inclusive of GST

ASHLY TRA 2075
TRA 2075
SGD 1,732.00

Availability: In stock

POWER AMPLIFIER

Only 1 left

Price includes 7% GST

OR

Description



The Ashly TRA-2075 is a 2-channel convection-cooled rackmount P.A. or installation power amplifier housed in a rugged 2RU metal chassis, offering an output of 40 Watts per side at 8 Ohms, designed to drive 4 and 8 Ohm loads and transformer coupled 70V and 100V lines simultaneously. The coupling transformers are internally mounted.


 


The TRA-2075 incorporates a switch-mode-power supply and Class-D amplifier circuitry, providing a power-efficient solution. The low-noise unit features a switchable HPF filter and selectable gain sensitivity, turn-on delay DIP switches with up to 8 seconds of delay available, and rear-mounted set-and-forget gain controls.


 


The TRA-2075 is equipped with an internally switchable 120V/240V power supply, extensive protection circuitry, and standard Euroblock inputs along with screw terminal outputs.


 


Features:


 



  • 2RU rackmount stereo power amplifier with 40 Watts per side power output at 8 Ohms and built-in 60W/70V transformer

  • Designed to simultaneously drive 4- or 8-Ohm loads and 70V/100V transformer-coupled lines

  • 2-stage high-efficiency switched mode power supply with high power-to-weight ratio

  • Ultra-quiet convection-cooled operation

  • On-board 80Hz HPF, selectable gain sensitivity

  • Up to 8 sec. of turn-on delay with selectable Dip Switch complement

  • Comprehensive amplifier protection circuitry includes: Output Over-current, DC Output, Main Supply Rail Over-voltage, Chassis Temperature, Inrush Limiting, Mains Fuse

  • Front Panel Indicators include: overall power, standby, and protect; per-channel clip and signal indicators

  • Euroblock input connectors, Screw Terminal outputs



Specifications

Power Rating

Stereo @ 8 Ohms: 40W per Ch.


Stereo @ 4 Ohms: 75W per Ch.


Stereo @ 70V: 75W per Ch.


Stereo @ 100V: 75W per Ch.

Damping Factor >200, 8-Ohm load, <1kHz
Input Sensitivity 1.5V
Input Impedance 20 kOhms, Balanced
Gain Selectable 26dB or 36dB
Frequency Response 20 Hz - 20 kHz, +/-1.0dB
Signal-to-Noise Ratio >98dB, 20Hz - 20kHz unweighted
Total Harmonic Distortion (THD) <0.01% (8-Ohm load, 10dB below rated power, 20Hz - 10kHz
Input Connections 2 x Ch.1,2 3- Pin Euroblock
Output Connectors 2 x Ch.1,2 Screw Terminals
Controls Front Panel 1 x Power Switch
Controls (Rear)

2 x Gain Control Knobs


4 x Delay DIP Switches


2 x 80Hz HPF On/Off Buttons


2 x Gain Sensitivity Buttons

Indicators

1 x Blue Power On LED


1 x Yellow Standby LED


1 x Red Protect LED


2 x Red Clip LED's


6 x Green -24/-18/-12dB Signal LED's 


4 x Yellow -6/-3dB Signal LED's

Cooling Convection-cooled
Power Consumption

18.75W (1/8 Power Pink Noise @ 4 Ohm)


Typical Current:


Idle: 0.30A


1/8 Power: 0.69A

Dimensions 19 x 3.5 x 11" (483 x 89 x 279.4mm)
Weight 19.5 lb (8.8 kg)
Specialties

Adjustable Turn-On delay Switches


Convection Cooling


Switch-Mode Power Supply

 

Click here for full specs

  Loading...